Faded Metal Specification
Recommended Product System for Cement Tiled Roofing
Step-1 Seal and bind the tile surface with Multiseal
Guarantees a solid surface for perfect topcoat adhesion to the tile.
Purpose of Use: |
Seal and bind the cleaned tiled surface so that any retained chalk from the existing factory colour finish is bound hard and ready for topcoat ahesion. |
Coverage Rate: |
One coat @ 6 ~ 8 m2/ltr |
Roof Size | Required Litres of Multiseal (average) |
100 m2 | 11.0 |
150 m2 | 16.6 |
200 m2 | 22.2 |
250 m2 | 27.8 |
Note: Average coverage rates above include the profile of the cement tile which is on average 25% greater than the tiled area. |
_____________________________________________________
Step-2 Tilesheild PCM
Utra-UV tough and fade resistant heat reflective topcoat.
xxxxxxxx