Raw Aluminium

Recommended Products

Prep-Coat.

Energy Star® Heat Reflective Primer
Energy Star® Autumn Apa8111-Paint by Wallmaster Paints
Energy Star® Heat Reflective Primer
Energy Star® Heat Reflective Primer
Energy Star® Heat Reflective Primer
Energy Star® Autumn Apa8111-Paint by Wallmaster Paints
Energy Star® Heat Reflective Primer
Energy Star® Heat Reflective Primer
ProductEnergy Star AC3 IR Grey Primer
Coats Required1
Coverage10 to 12 m2 / Ltr

An Infrared Heat Reflective Anti-Corrosive Primer.

Energy Star® AC-3 Primer is a premium grade, water-based, 100% acrylic anti-corrosive primer coating, designed for use on all correctly prepared metal substrates. AC-3 Primer is low in Volatile Organic Compounds and adhesion promoted for outstanding direct to substrate adhesion, even on difficult substrates such as aluminium, glass, melamine and new galv metal.

Energy Star® paints are sustainable and Energy Efficient paints and coatings for roofs and walls that significantly reduce absorbed heat in the building envelope.  The use of Energy Star® paints during restoration or new construction results in energy cost savings, cooler occupancy zones and reduced Co2 emissions.

Learn More;  @ Energy Star® Home

Top-Coat.

Paint by Wallmaster Paints-Urethane Trim Enamel
Paint by Wallmaster Paints-Urethane Trim Enamel
Paint by Wallmaster Paints-Urethane Trim Enamel
Paint by Wallmaster Paints-Urethane Trim Enamel
Paint by Wallmaster Paints-Urethane Trim Enamel
Paint by Wallmaster Paints-Urethane Trim Enamel
Paint by Wallmaster Paints-Urethane Trim Enamel
Paint by Wallmaster Paints-Urethane Trim Enamel
Paint by Wallmaster Paints-Urethane Trim Enamel
Paint by Wallmaster Paints-Urethane Trim Enamel
Second CoatsTrim Enamel
ProductUrethane Trim Enamel, Satin or Gloss
Coats Required2
Coverage10 to 12 m2 / Ltr

Wallmaster Urethane Trim Enamel is a tough 100% Urethane enamel finish designed for use on all interior and exterior doors, architraves, skirting boards, window frames and trim. The product provides a tough, impact and scratch-resistant finish that will not yellow and is highly resistant to household stains and chemicals.

This water-based product is very low in odour, has extended working time for ease in application and flows to a smooth and very uniform finish. The product is touch dry in 30 minutes so surfaces won’t stick together making it the ideal product for new construction and renovation environments.

Use On:
Pre-primed MDF, primed aged enamels, all timbers, meranti, cement sheet, galvanized metal and aluminium. Do not use this product for any other purpose than as specified in our literature.
  • Ultra-Tough Trim Enamel
  • Extended Open and Working Time
  • Low VOC - Low Odour
  • Non-Yellowing - Pure White
  • Hard Wearing & Scratch Resistant 
  • Excellent Flow & Levelling
  • Strong Stain Resistance
  • Water Clean-Up
  • Australian Made and Owned.

Learn More:

To find out more visit:
Wallmaster Urethane Trim Enamel

    Select Urethane Enamel in Gloss or Satin from within any of the following colour collections.